HP Deskjet 5943 Photo Printer - Manual (Page 52)

Set the auto-off feature
Select the auto-off feature to automatically place the printer into idle mode after 30
minutes and to turn back on automatically when print jobs are sent to the printer.
Selecting auto-off cancels the
FEMP energy savings mode.
Follow these steps to activate the auto-off feature:
1.
Open the HP Printer Utility .
2. Select Power Management.
3. Follow the onscreen instructions.
Align the print cartridges
The printer automatically aligns the print cartridges after a new print cartridge is
installed. You can also align the print cartridges at other times to ensure optimal print
quality.
To align print cartridges:
1.
Load Letter or A4 plain, white paper in the In tray.
2. Open the HP Printer Utility .
3. Select Align.
4. Click the Align button, and then follow the onscreen instructions.
Calibrate color
Perform a color calibration if the colors in photos that are printed with the photo print
cartridge consistently look incorrect.
Before performing a color calibration, align the print cartridges , and then reprint the
photo. If the color is still incorrect, perform a color calibration.
Both a photo print cartridge and a tri-color print cartridge must be installed for color
calibration.
To calibrate color:
1.
Load Letter or A4 plain, white paper in the In tray.
2. Verify that a photo print cartridge is installed in the printer.
3. Open the HP Printer Utility .
4. Select Calibrate Color.
5. Click the Calibrate button, and then follow the onscreen instructions.
Automatically clean print cartridges
If your printed pages are missing lines or dots, or if they contain ink streaks, the print
cartridges might be
low on ink or might need to be cleaned.
If the print cartridges are not low on ink, follow these steps to clean the print cartridges
automatically:
1.
Open the HP Printer Utility .
2. Select Clean.
3. Click the Clean button, and then follow the onscreen instructions.
Chapter 10
50 HP Deskjet 5900 series