HP Deskjet 5943 Photo Printer - Manual (Page 68)

● Verify that the protective piece of plastic tape has been removed from the print
cartridges.
1 Remove plastic tape
● Consider selecting a higher print quality .
Blank pages print
●
The protective piece of plastic tape might still be attached to the print cartridges.
Verify that the plastic tape has been removed from the print cartridges.
1 Remove plastic tape
● The print cartridges might be out of ink . Replace one or both empty print
cartridges.
● The printer might be in direct sunlight. Direct sunlight can adversely affect the
Automatic Paper-Type Sensor . Move the printer out of direct sunlight.
● You might be trying to print a borderless document with only the black print
cartridge installed. When printing a borderless document, always have the tri-
color print cartridge and a black or photo print cartridge installed.
Too much or too little ink appears on the page
If too much or too little ink appears on the page,
follow these instructions .
Too much or too little ink appears on the page
Follow these steps to adjust the ink density:
1.
Open the Print dialog box, and then select the Color pane.
2. Select the Paper Type/Quality pane.
3. Click the Ink tab.
4. Move the Ink Density slider toward Light or Heavy.
Chapter 11
66 HP Deskjet 5900 series