HP ProLiant DL380 G5 Server User Manual
Page 59
•
Not supported—Indicates that the library cannot detect or report redundancy status.
•
Unknown—The redundancy status of the tape library cannot be determined. Ensure the latest drivers and
Storage Agents are installed.
•
Hot Swap—Displays the tape library hot swap status which denotes the presence of hot swappable internal
components, such as drives, fans, power supplies, etc. The following values are valid:
•
Capable—Indicates that the library is capable of detecting and reporting hot-swappable internal
components and has at least one hot-swappable component.
•
Not capable—Indicates that the library is capable of detecting and reporting hot swappable internal
components but there are no hot-swappable components installed.
•
Not supported—Indicates that the library cannot detect or report hot-swap status.
•
Unknown—The hot-swap status of the tape library cannot be determined. Ensure the latest drivers and
Storage Agents are installed.
•
Last Known Error—Displays the hexadecimal error status code including text information, if available. For
details, see the hardware documentation for more information.
•
Associated Tape Drives—Displays a list of tape drives associated with the tape storage system.
Tape devices
Select a tape device entry in the SCSI controller submenu to display a list of information and status associated with
the selected tape device. The following information is displayed:
•
Status—Displays the status of the SCSI Tape drive that you selected. The following values are valid:
•
OK—Indicates the tape drive is operating normally.
•
Failed—Indicates the tape drive has failed and might need to be replaced.
•
Offline—Indicates the tape drive is offline and can no longer return data. No further status is available.
•
Missing—Was OK—Indicates a tape drive that was located in the system and had a status of OK, which
has been removed.
•
Missing—Was Failed—Indicates a tape drive that was located in the system and had a status of failed has
been removed.
•
Missing—Was Offline—Indicates a tape drive that was located in the system and had a status of offline has
been removed.
•
Unknown—The Storage Agents cannot determine the status of this tape drive. You might need to upgrade
your driver software or Storage Agents.
•
Model—Displays a description of the SCSI tape device model as returned by the SCSI inquiry command. Use
this item for identification purposes.
•
Firmware Version—Displays the firmware revision level of the tape device as returned by the SCSI inquiry
command.
•
Serial Number—Displays the serial number assigned to the tape device. This value is based on the serial
number as returned by the SCSI inquiry command, but might have been shortened because of space limitations.
Use this item for identification purposes.
NOTE:
Not all tape devices support serial numbers.
•
Placement—Indicates whether the physical drive is in an internal or external storage system. The following
values are valid:
•
Internal—The physical drive is in an internal storage system.
•
External—The physical drive is in an external storage system.
•
Unknown—The physical drive is not in a storage system or the Storage Agents cannot determine the drive
placement.
—
This symbol indicates that the drive is a hot-plug drive.
•
Library Drive—Indicates whether the tape drive is included in a tape library. The following values are valid:
•
Yes—The tape drive is included in a tape library.
•
No—The tape drive is not included in a tape library.
•
Unknown—The Storage Agents are unable to determine if the tape drive is included in a tape library.
•
Media Changer Information—Displays the autoloader media changer information. This only displays when the
tape device is an autoloader.
Agent information 59