HP NonStop G-Series - Manual (Page 69)

M8501 and M8502 ACL Tape Drive Installation and User’s Guide — 529972-003
A- 1
A
Installing and Configuring the ACL
Tape Drive for the NonStop S-Series
Server
This section includes:
Configuration Overview
The tape drive can be attached to a NonStop S-series server via an IOAM enclosure.
The tape drive attaches to the FCSA (Fibre Channel ServerNet adapter) in the IOAM
enclosure. The ServerNet switch board in the IOAM enclosure connects to a MSEB
(modular ServerNet expansion board) on a NonStop S-series server via a fiber-optic
cable.
Figure A-1 on page A-2 shows a configuration example of the tape drive
connected to a NonStop S-series server via an IOAM enclosure.
Configuration Overview A-1
Installation A-3
Configuration A-11