HP LaserJet 6pmp Printer series User Manual
Page 58
6
Move the subtray to the rear position
(
C
), aligning the tabs on the front
sides of the subtray with the rear
grooves. Press the subtray down until
it snaps into place (
D
).
Continue here if not using Legal paper
size.
7
Press the top of the paper length
guide toward the center of the tray.
The guide should detatch from the
tray.
8
Align the pointer on the left of the
guide (
E
) with the desired paper size.
Insert the two front side tabs into the
appropriate holes (
F
) and push back
on the guide to the upright position,
snapping the center tab into place (
G
).
9
Load up to 250 sheets of paper in the
tray. Keep the paper below the arrows
on the paper length guide (
H
) in the
rear of the tray. Make sure the paper
is flat in the tray at all four corners. If
needed, press on the clip lever (
I
) to
raise the front left metal holder (
J
) so
the paper will fit underneath.
10
Slide Tray 2 back into the printer.
3
P
rint
ing
T
asks
EN
Printing Tasks
3-7