Installing a hot-plug sas hard drive, Removing a hot-plug sas hard drive – HP ProLiant DL380 G5 Server User Manual
Page 48
Advertising
Hardware options installation 48
Installing a hot-plug SAS hard drive
1.
Remove the SAS hard drive blank.
2.
Install the hard drive.
3.
Determine the status of the hard drive from the hot-plug SAS hard drive LED combinations ("
SATA hard drive LED combinations
Removing a hot-plug SAS hard drive
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.
1.
Determine the status of the hard drive from the hot-plug SAS hard drive LED combinations ("
SATA hard drive LED combinations
2.
Back up all server data on the hard drive.
Advertising