HP XP P9500 Storage - Manual (Page 54)

•
If you are creating a Continuous Access Journal pair for delta resync, make sure all requirements
are met. See
“Creating a delta resync pair ” (page 137) .
•
If this program product is running on a primary storage system or secondary storage system,
stop Performance Monitor before performing the initial copy to avoid overloading with TCP/IP
traffic. For details about Performance Monitor, see HP P9000 Performance for Open and
Mainframe Systems User Guide.
To create an initial copy or copies
1. In Remote Web Console, select Actions > Remote Copy > Continuous Access Journal> Pair
Operation.
2. Click to change the mode from View to Modify.
3. In the tree, select the port of the P-VOL or host group (displayed below the ports). The volumes
available for pairing display in the right-side list area.
4. Right-click a volume that you want as a P-VOL and select Paircreate from the menu.
•
Volumes with the pair icon are already used as P-VOLs.
•
Volumes with the pair icon are already used as S-VOLs.
•
You can create more than one pair at one time. In this case, all the S-VOLs must be in
the same secondary system.
54 Pair operations