HP Lights-Out 100 Remote Management - Manual (Page 31)

Using Integrated Lights-Out 100i 31
The PET Destinations section indicates to the remote management processor
where to send the PET if it is configured to send the trap to a remote system. This
section has up to four entries specifying IP and MAC addresses. The address to
use is selected in the Alert Policy Table (shown in the figure).
The Alert Policy Table section has three fields:
•
•
•
Policy Enable — This field enables you to selectively enable and disable trap
forwarding.
Policy Number — This field enables you to choose a policy that will be used
in PEF configuration.
Destination Selector — This field specifies where to send the PET trap from
the destinations defined in the PET Destination section.