HP Lights-Out 100 Remote Management - Manual (Page 5)

5
Operational overview
In this section
Server management ........................................................................................................................ 5
Server management features........................................................................................................... 5
•
•
•
•
Server management
The HP ProLiant DL145 G1 Lights-Out 100i Remote Management Processor
delivers basic remote control of vital server resources, and supports IPMI 1.5.
Throughout this document, you will also see the term "BMC," which is
synonymous with remote management processor.
The ProLiant DL145 G1 Lights-Out 100i Remote Management Processor
provides system administrators with access to the server at any time, even before
an operating system is installed on the server. This remote management
processor provides a text mode console redirection, IPMI CLI, and browser
access to many of the same IPMI functions. You can access the remote
management processor and the management features of the HP ProLiant DL145
G1 Server through a dedicated Ethernet over TCP/IP management port or
through the integrated serial port.
Server management features
With the ProLiant DL145 G1 Lights-Out 100i Remote Management Processor,
you can:
Switch between console redirection and the CLI using either the dedicated
management or serial port
Remotely power on and off the server
Perform warm or cold server reboots
Remotely monitor server state voltage, fan speed, and system state (S0 or S5)