Set net v6 manual, Set net v6 stateless, Set net v6 manual set net v6 stateless – HP Command View for Tape Libraries Software User Manual
Page 214
set net v6 manual
NOTE:
To use this command, first enable IPv6 using the
command.
Description
Configures the Interface Manager to accept a user-provided network address
for the public network interface.
Syntax
set net v6 manual
[[on] |
[off] force
]
NOTE:
The off argument removes all manually configured network addresses
Availability
All users and modes
Operands
[[on] | [off] force]
Examples
To configure the Interface Manager to accept a user-provided network address
for the public network interface.:
/>set net v6 manual on
Add IPv6 address. Select Prefix
1) 2620:0:a07:e00a::
2) fe80::
Enter a selection or 'Q' to quit [default='Q']: 1
Enter interface identifier. xxxx:xxxx:xxxx:xxxx, a single
'::' is allowed.
Enter a selection or 'Q' to quit [default='Q']: a:b:c:d
Caution: Changing Manual addressing may cause your CLI
session to terminate(for a telnet/ssh user), and you may have
to log on again.
Do you really want to enable Manual addressing?
Enter 'y' to continue or 'n' to skip [default='n']: y
ipAddress = 2620:0000:0a07:e00a:000a:000b:000c:000d/64
Operation status: Starting to change network.
Operation status: Finished Updating Network Settings
See also
set net v6 stateless
NOTE:
To use this command, first enable IPv6 using the
command.
Description
Configures the Interface Manager card to obtain IPv6 network addresses using
stateless address auto-configuration.
CAUTION:
Changing stateless address auto-configuration may cause your
Telnet/SSH session to end. You will have to log on again.
Syntax
set net v6 stateless
[[on] | [off] force]
Availability
All users and modes
Operands
Force
is optional and overrides any
validation processes.
[[on] | [off] force]
Examples
To configure the Interface Manager to obtain IPv6 network addresses using
stateless address auto-configuration:
/>set net v6 stateless on
Caution: Changing Stateless address auto-configuration may cause
214
CLI Command Reference