HP ProLiant DL360e Gen8 Server - Manual (Page 59)

Hardware options installation 59
14. Remove the fan blanks.
15. Install the additional fans included in the processor option kit.
NOTE: A dual-processor configuration requires all eight fans. Some single-processor
configurations might already have five fans populated. Store any unused fans as spares.
16. Install the access panel (on page 19 ).
17. Install the server into the rack (" Installing the server into the rack " on page 26 ).
18. Power up the server (on page 16 ).
Expansion board options
The server has both full-height and low-profile expansion slots for controller option installation (" PCIe riser
board slot definitions " on page 9 ).
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP Product Bulletin website ( http://www.hp.com/go/productbulletin ).