HP StorageWorks XP Remote Web Console Software - Manual (Page 72)

72 Volume Management for the XP1024/XP128
5. After configuring custom volumes, click Next. The Install CV pane (2) is displayed.
Figure 37 Install CV pane (2)
Use this pane to assign the CU and LDEV numbers of a custom volume to be created. The top area is
the CV setting information area and shows detailed information about the custom volumes to be
created. The bottom area is the LDEV number setting area and is used to set the CU and LDEV numbers
for the custom volume to be created.
6. In the CV setting information area, select one or more custom volumes.
7. In the Select CU No. list, select a CU number. The LDEV number setting area is updated to reflect the
selected CU number.
8. If you selected multiple custom volumes, select an interval from the Interval list. This value specifies the
interval between the LDEV numbers that need to be assigned to the new volumes. The default value is
0. When you select 0, consecutive LDEV numbers are assigned. The value you specify as the interval
between LDEV numbers counts only the available LDEV numbers.
9. In the LDEV number setting area, select an LDEV number by clicking the appropriate white box. For
example, to select an LDEV number of 96, click the +90/+6 box as shown in Figure 38 .