HP XP Array Manager Software - Manual (Page 29)

Figure 9 Specifying HBAs to be Monitored
.
For more detailed instruction, see “ Setting Priority for Ports on the Storage System ” on page 34.
XP Performance Control is unable to monitor and control the performance of hosts whose HBAs
icons are placed below the Non-Monitor icon.
3. Set priority to HBAs using the WWN tab of the Performance Control window.
In network B, the production server is given high priority and the development server is given
low-priority. If your network is configured as in
Figure 8 , you must give high priority to wwn01
and give low-priority to wwn02 and wwn03.
To give priority to the three HBAs, take the following steps (see
Figure 10 below):
a. In the WWN tab, select one of the four ports that the HBAs are connected to (that is, ports
1A, 1C, 2A, and 2C).
b. Set wwn01 to Prio.. Also, set wwn02 and wwn03 to Non-Prio..
Figure 10 Priority specified in the Performance Control Window
.
XP24000/XP20000 Performance Control User Guide 29