HP NonStop G-Series - Manual (Page 191)

Stopping Processing is being terminated.
Unknown Component is not responding.
OK Component is accessible.
Enabled State
Value Meaning
Disabled
The component is present but not operational, possibly because the Disable action was
performed.
Enabled The component is operational.
Fault
A problem was detected. The component might be functioning below standard or not
responding. Inspect the component.
Off The component is not functional.
On The component is functional.
Unknown State is unknown; component might not be responding.
Group Type
A unique number in the system that identifies this group. Group Type is displayed in a window on
the front door of the enclosure.
Depending on your system configuration and topology, these are the possible group numbers for
processor enclosures and I/O enclosures:
Processor Enclosures I/O Enclosures
01 11, 12, 13
02 21, 22, 23
03 31, 32, 33
04 41, 42, 43
04 51, 52, 53
06 61, 62, 63
07 71, 72, 73
08 81, 82, 83
Path State
Value Meaning
Configure The component is not configured.
Down
The disk path is not logically accessible. In SCF, the equivalent state is
STOPPED, substate DOWN.
Exclusive Diagnostics The processor is performing diagnostics.
Exclusive
Exclusive ownership has been declared for this disk volume, and the disk is
not accessible to other users.