Actions, Switch-to-node pic, Attributes – HP NonStop G-Series User Manual
Page 228
Enabled State
The initial state of the component at the time of discovery.
Enabled: The component is operational.
Disabled: The component is present but not operational.
Device State
Whether the power supply has a fault.
Values: OK, Fault
Actions
Blink LED Off
Turns off the blinking of the LEDs.
Blink LED On
Causes the LEDs to blink on and off.
Switch-to-Node PIC
that connects to a ServerNet node. The last
part of the name contains the port number where the PIC is located. Only the PICs in ports 0
through 7 of the switch are used for switch-to-node connections.
Location in OSM tree: External ServerNet Fabric > Switch Group > Switch Module > Switch
> Switch PIC
Example: Switch PIC $ZZSMN.X2.4 (indicates the PIC in port 4 of switch X2)
Attributes
Switch PIC
Service State
Displayed in the Attributes tab and Attributes dialog box only if attention or
service is required.
Logical