HP NonStop G-Series - Manual (Page 44)

Chapter 6. Viewing Alarms
Chapter 6. Viewing Alarms
Viewing the Alarms Tab
Viewing Alarms for a Selected Resource
Viewing Alarm Details
Suppressing Alarms
Alarms can be viewed in these ways:
On the Alarms tab of the Details pane: see Viewing the Alarms Tab . ●
All alarms associated with a specific resource: see Viewing Alarms for a Selected
Resource .
●
A summary of alarms for the entire server or ServerNet cluster: see Viewing a Summary
of Alarms .
●
Detailed information about a particular alarm: see Viewing Alarm Details . ●
Viewing the Alarms Tab
The details pane displays attribute and alarm information about a selected resource, depending
on which tab you select. If there are any alarms for a selected resource, a bell icon appears on
the Alarms tab.
The Alarms dialog box provides this information about the selected alarm:
Alarm severity
The Severity column contains a colored icon corresponding to the severity of the alarm.
Red icons represent Critical and Major alarms. Yellow icons represent Minor, Warning,
and Indeterminate alarms. See
Alarm Severity .
●
Time and date the alarm occurred ●
Description of the alarm, including the probable cause ●
Whether the alarm is dialed out to your service provider (assuming your system console
is configured to dial out). ●