Traceroute – HP Traffic Director sa7220 User Manual
Page 139
Advertising

C H A P T E R 4
Tools Screen
127
Traceroute
The Traceroute command displays the route that packets travel to the
specified network device. To trace the route from the SA8220 to
another device:
1. From the Command menu, click traceroute.
2. In the Parameters field, type the host name or IP address of the
target device.
3. Click Run.
After a few seconds, the Traceroute information displays in the
Results window, as shown below.
Tools Screen Displaying Traceroute Results
4. To clear the Results window, click Clear.
Advertising
This manual is related to the following products: