HP Traffic Director sa7220 - Manual (Page 279)

A P P E N D I X B HTTP Header Information
267
HTTP Header Information
NOTE: Only the
SOURCE_IP parameter
is supported by the
SA7200 and SA7220. The SA8220 includes the client IP address and current encryption
information in the HTTP request sent to the server. This information
is provided below.
To set up the header-certificate, follow these steps:
1. Verify header is enabled at the service level by typing “info” at
the prompt, as follows:
config policygroup <policygroup name> service
<service name> info
2. By default, header-certificate is enabled. If it is not enabled,
enable it, as follows:
config policygroup <policygroup name> service
<service name> header enable
3. Enable header-certificate as follows:
config policygroup <policygroup name> service
<service name> key client-ca header-certificate
enable
4. Be default, header-certificate is disabled.
5. For more information on header-certificates, please see “HTTP
Header Option Fields” in Chapter 2, and “config policygroup
service key client-ca header-certificate”, in Chapter 5.
Tag Value
HP_CLIENT_
CERTIFICATE The client certificate in ASCII.
HP_CIPHER_USED The cipher suite for the connection.
For example: DES-CBC-SHA
HP_SOURCE_IP The client's IP address in ASCII.
For example: 209.249.194.100
HP_SSL_SESSION_ID The SSL session ID in ASCII.
For example: 8273A4F348EFF90