HP UPS Extended Runtime Module - Manual (Page 7)

Component identification 7
UPS front panel controls
The front panel is shown with the bezel removed.
Item Description Function
1 On button Powers up the UPS (" Starting power to the
load " on page 24 )
2 Standby button Places the UPS in Standby mode (on page
27 )
3 Test/Alarm Reset button Silences UPS alarms (" Silencing an audible
alarm " on page 31 )
Initiates a self-test (" Initiating a self-test " on
page 30 )
4 Configure button Places the UPS in Configure mode (on
page
28 )