HP Deskjet D1341 Printer - Manual (Page 22)

3. Push the paper into the printer until it stops.
Note The paper will extend over the edge of the tray.
4. Slide the paper guide firmly against the edge of the paper.
Print
1.
Open the Printer Properties dialog box .
2. Click the Printing Shortcuts tab.
3. In the What do you want to do? drop-down list, click General everyday
printing, and then specify the following print settings:
–
Paper type: Plain paper
– Paper size: An appropriate paper size
4. Select the following print settings:
–
Print quality if you want a print quality other than Normal.
– Print on both sides if you want to print on both sides of the paper.
For more information, see
Two-sided printing .
5. Select any other print settings that you want, and then click OK.
Use the What's This? help to learn about the features that appear in the Printer Properties
dialog box.
Print letters
Guidelines
●
For information about printing an envelope for your letter, see envelopes .
● Do not exceed the paper tray capacity: 80 sheets of paper.
Prepare to print
1.
Slide the paper guide all the way to the left.
2. Place plain paper in the right side of the tray. The side to be printed on should face
down.
Note If you are using letterhead paper, the letterhead should face down and
point toward the printer.
Chapter 6
20 HP Deskjet D1300 series