Print transparencies, Transparencies – HP Deskjet D1341 Printer User Manual
Page 27
●
Make sure the CD/DVD tattoo covers the entire backing sheet with no exposed
spaces. Separating any part of the CD/DVD tattoo from the protective backing sheet
before printing could damage the printer.
●
Avoid using a CD/DVD tattoo that is pulling away from the protective backing, or that
is wrinkled, curled, or damaged in any way.
●
Do not exceed the input tray capacity: 1 sheet of CD/DVD tattoo paper.
Prepare to print
1.
Raise the output tray, and then remove all paper from the input tray.
2.
Slide the paper guide all the way to the left.
3.
Place one sheet of CD/DVD tattoo paper in the right side of the input tray. The side
to be printed on should face down.
4.
Push the paper into the printer until it stops.
5.
Slide the paper guide firmly against the edge of the paper.
6.
Lower the output tray.
Print
1.
Open the
.
2.
Click the Paper/Quality tab, and then specify the following print settings:
–
Size is: 5x7in.
–
Type is: HP CD/DVD Tattoo
–
Print quality: Best
3.
Select any other print settings that you want, and then click OK.
Use the
to learn about the features that appear in the Printer Properties
dialog box.
Print transparencies
Guidelines
●
For great results, use HP Premium Inkjet Transparency Film.
●
Do not exceed the paper tray capacity: 20 transparencies.
Prepare to print
1.
Slide the paper guide all the way to the left.
2.
Place the transparencies in the right side of the tray. The side to be printed should
face down and the adhesive strip should face up and toward the printer.
HP Photosmart Software Help
25