HP Deskjet D1341 Printer - Manual (Page 67)

If the printout has an unwanted border, try the following solutions:
●
Align the print cartridges .
● Open the Printer Properties dialog box , click the Paper/Quality tab, and verify that
the selected paper size matches both the paper size that the photo is formatted for
and the size of the paper that is loaded in the printer.
● Open the Printer Properties dialog box , click the Paper/Quality tab, and then select
the Borderless auto fit check box.
● Verify that the software application you are using supports borderless printing.
● Verify that no problem exists with the source image. For example, if you are printing
a scanned image, verify that the image was not crooked when it was scanned.
For small photo paper with a tear-off tab
If the border appears below the tear-off tab, then remove the tab.
If the border appears above the tear-off tab, then align the print cartridges .
Error messages
● Print cartridge error messages
● Other error messages
HP Photosmart Software Help 65