HP LaserJet 9000 Printer series - Manual (Page 34)

34 2 Finisher tasks ENWW
Selecting the output location
You can select an output location (bin) through the software
application or through your printer driver. (Where and how you make
selections depends on your program or driver.) If you cannot select an
output location from the program or the driver, set the default output
location from the printer control panel.
To select an output location from the control panel
On the touch screen of the graphical display:
1 Touch MENU.
2 Touch CONFIGURE DEVICE .
3 Touch PRINTING .
4 Touch PAPER DESTINATION.
5 Scroll to the output bin or device you want, and then touch OK .
Your network administrator might have changed the name of the
device. An asterisk (*) appears next to your selection.
On the non-touch screen:
1 Use or to scroll to CONFIGURE DEVICE and press .
2 Use or to scroll to PRINTING and press .
3 Use or to scroll to PAPER DESTINATION and press .
4 Use or to scroll to the output bin or device you want and
press . Your network administrator might have changed the
name of the device. An asterisk (*) appears next to your selection.