HP Radio Frequency Planner Software Series - Manual (Page 13)

Table of Contents
HP RF Planner User Guide
6
Figure 2. New Project
• Click <Create New> to start a New Project File to create a new Wi-Fi project.
• Select a file from the Recent Files section to view a recently used project.
• Click <Browse> to select an existing project (.spm, .prj or .zip).
• Click <Open> to open the selected Wi-Fi project.
3.2.1 New Project File
You can start a new project in Planner by doing one of the following:
• From the File menu, select New Project.
• Click <Create New> on the Open Wi-Fi Project dialog box.
• Click on the Toolbar.
This opens the New Project File dialog box.
Figure 3. New Project File
Enter the following details in the New Project File dialog box.
• Name: Enter the desired name of the project.
• Location: Enter the desired location for the project or click <Browse> to navigate to the location. In the Browse For
Folder dialog box, select a location from the folder tree or click <Make New Folder> to add a new location to the
folder tree.