If you still cannot print then, Reset the, Printer to the factory default configuration – HP Deskjet 6127 Color Inkjet Printer User Manual
Page 182: Reset it to its factory, Default configuration
Advertising
resetting the printer to the factory default configuration
Once the printer is configured on an ethernet, its configuration settings are saved in its
memory. You may need to reset the printer to its factory default configuration, if you
cannot:
●
Print to the printer
●
Open the printer's
Follow these steps to reset the printer to the factory default configuration:
1. Verify that the printer is powered off.
2. Press and hold down the
Cancel
button (X).
3. While holding down the Cancel button, press the
Power
button to turn the printer
on.
4. Release the
Cancel
button.
5. Verify that all three printer lights simultaneously blink twice.
all three lights simultaneously blink twice
If the lights do not blink, then repeat steps 1–4.
182
Advertising