HP Officejet 600 All-in-One Printer - Manual (Page 12)

1-4
3. Connect the Printer Cable
Important: You must use the enclosed bi-directional parallel cable to
attach the HP OfficeJet to your computer. If you do not use a bi-
directional cable, the HP OfficeJet will not work.
● For safety, turn off your computer before connecting the printer
cable.
● Connect the
notched end of
the bi-directional
parallel cable
firmly to the
cable port on the
back of the HP
OfficeJet. Snap
both metal clips
into the notches
on the connector.
● Plug the other end
of the cable into
the
parallel (LPT1)
port on the back of
your computer.
Tighten the
connector’s screws.
4. Connect the Power Cord
● Plug the power cord connector firmly into
the power socket on the back of the HP
OfficeJet.
● Plug the other end of the power cord into a
grounded electrical outlet.
Warning: To avoid the possibility of electrical
shock, plug the other end of the power cord
into a grounded electrical outlet only.
Caution: If you need to disconnect power
from the HP OfficeJet, detach this cable. The
On/Off button does not completely disconnect
the power.
Notched end
of cable
Cable port