Loading the paper supply – HP Officejet 600 All-in-One Printer User Manual
Page 36
2-2
Loading the Paper Supply
Pull the document tray forward all the way until it
snaps into the upright position.
Pull up the paper extension at the back of the HP
OfficeJet to support the paper.
Load about a 1/2-inch-thick stack of 20-lb paper
into the paper tray. The paper should fit behind the
stack guides
on the lower part of the tray as
shown.
Notes:
●
Use only plain letter- or legal-size paper for copy-
ing.
●
If you change the paper size in the tray, be sure to
update the paper size setting in the software. Refer
to “Changing the paper size setting” on page 3-23
for instructions.
Push the document tray back to its normal position,
resting in front of the paper tray.
Extend the
output tray
slowly until it stops.
OfficeJet
OJ-14loadpa
Stack
guides
Output
Tray
Paper extension
1
2
3
4
5