HP Officejet 600 All-in-One Printer - Manual (Page 74)

4-2
Copying from the Keypad
Copying from the keypad only supports black and white copying.
Also, copying from the keypad is not recommended for large or
complex documents. Copy color documents or large documents using
the Document Assistant.
Note: You may want to use the scan/copy sleeves provided to protect
fragile or damaged original documents or photos for copying. For
more information regarding these sleeves, refer to “Using a Scan/
Copy Sleeve to Protect Your Original” on page 2-3.
If your original document is a photograph, or if you want your copies
to be darker or lighter than your original, use the instructions in the
section, “Controlling how your copies will look” below.
Load your document with the printed side facing
away from you. You can load up to 20 pages, or a
single scan/copy sleeve. If necessary, slide the
document guides on the tray to the left or right to
adjust them for the width of your document.
Note: Always remove staples and paper clips from
your original before copying to avoid equipment
damage.
Press the Copy button, then enter the number of
copies you want (up to 99).
Press the Copy button again to begin copying.
The entire original document will be scanned
before copying begins.
To cancel a copy in progress, press the Stop button
on the HP OfficeJet’s keypad.
Controlling how your copies will look
When you make a copy from the HP OfficeJet’s keypad, the way it
looks is determined by the Contrast and Resolution settings that are
selected on the keypad with the
Contrast/Resolution button.
Note: The Contrast/Resolution settings also affect the quality of
paper faxes sent from the keypad. See “Changing the Resolution” on
page 3-9 and “Changing the Contrast” on page 3-12.
Document
guides
1
2
3