HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 19)

Command line 19
Item Description
update firmware Update the firmware on all Virtual Connect modules in the domain
Syntax
update firmware url=<firmware image address>
Example
->update firmware url=http://www.myserver.com/fw/vc-1.20.rom
Updates the firmware on all Virtual Connect modules in the domain
igmp
Manage Ethernet IGMP Snooping settings.
Supported actions:
help, set, show
Item Description
set igmp Modify Ethernet IGMP Snooping settings
Syntax
set igmp [Enabled=<true|false>] [Timeout=<interval>]
Properties:
Enabled Enables or disables IGMP Snooping. Valid values include "true" and "false".
Timeout The idle timeout interval (in seconds) for IGMP Snooping. Valid values include
integers from 1-3600. The default IGMP idle timeout is 260 seconds.
Examples:
->set igmp Enabled=true
Enables IGMP Snooping
->set igmp Enabled=true Timeout=30
Enables IGMP Snooping and sets the idle timeout
Item Description
show igmp Display Ethernet IGMP Snooping settings
Syntax show igmp
Example
->show igmp
Displays IGMP Snooping settings
interconnect
Manage I/O interconnect modules.
Supported actions:
help, remove, show
Item Description
remove interconnect Remove a module from the domain that has physically been removed from an
enclosure
Syntax remove interconnect <ModuleID|*>
Parameters:
ModuleID The ID of the module to remove. The ID is in the format
<EnclosureID>:<BayNumber>
Examples: