HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 27)

Command line 27
Item Description
->poweroff server enc0:2
Shuts down a specific server in device bay 2 of an enclosure with ID enc0
->poweroff server enc0:2 -Force
Forces a power off operation on a specific server (primary/local enclosure)
->poweroff server *
Powers off all servers in the domain
->poweroff server enc0:*
Powers off all servers in a specific enclosure
->poweroff server enc0:2 -ForceOnTimeout
Attempts a graceful poweroff, but forces a shutdown if not completed within
timeout period
->poweroff server * -timeout=180
Shuts down all servers and specifies a custom timeout of 3 minutes
Item Description
poweron server
Power on one or more physical servers
Syntax poweron server [<ServerID> | *] [-timeout=<timeout>]
Parameters:
ServerID The reference ID of a server in the domain. The format of the server ID is
<EnclosureID:DeviceBay>
Options:
Timeout
The timeout period (in seconds) to wait for the operation to complete. The default
timeout is 60 seconds.
Examples:
->poweron server 2
Powers on the specific server in bay 2 of the primary enclosure
->poweron server *
Powers on all servers in the domain
->poweron server enc0:*
Powers on all servers in a specific enclosure
Item Description
reboot server Reboot one or more physical servers
Syntax reboot server [<ServerID>|*] [-Force]
[-ForceOnTimeout] [-timeout=<timeout>
Parameters:
ServerID The reference ID of a server in the domain. The format of the server ID is
<EnclosureID:DeviceBay>.
If the Enclosure ID is not provided, then the
primary or local enclosure (enc0) is used by default.
Options:
Force Forces a reboot operation without waiting for the OS to shutdown gracefully. This
option should only be used as a last resort because it can potentially cause data
loss on the server.