HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 12)

Command line 12
Item Description
WwnPool
The pre-defined WWN pool to use for address assignment. Valid values include
integers 1-64. This property is only valid if the WwnType is set to "VC-Defined".
If not specified, the default pool ID is 1.
Examples:
->set domain Name=MyNewDomainName
Changes the name of the Virtual Connect domain
->set domain DomainIp=Enabled
Enables the domain IP address
->set domain DomainIp=Enabled IpAddress=192.168.0.120
SubnetMask=255.255.255.0 Gateway=192.168.0.1
Configures the domain IP address and enables it
->set domain DomainIp=Disabled
Disables the domain IP address and uses DHCP instead
->set domain MacType=VC-Defined MacPool=10
Sets the MAC address source to VC-Defined with a pre-defined range
->set domain MacType=Factory-Default
Set the MAC address source to use factory default MAC addresses
->set domain MacType=User-Defined MacStart=00-17-A4-77-00-
00 MacEnd=00-17-A4-77-00-FF
Sets the MAC address source to a custom, user-defined address range
->set domain WwnType=VC-Defined WwnPool=5
Sets the WWN address source to VC-Defined with a pre-defined range
->set domain WwnType=Factory-Default
Sets the WWN address source to use factory default WWN addresses
Item Description
show domain
Display general Virtual Connect domain information, such as the Virtual Connect
domain name and the VCM domain IP address settings
Syntax show domain [addressPool]
Examples:
->show domain
Displays domain information
->show domain addressPool
Displays the VC defined address pools for the domain
enclosure
Manage general enclosure settings and information.
Supported actions:
help, import, show
Item Description
import enclosure Import an enclosure into the domain