HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 24)

Command line 24
Item Description
Parameters:
NetworkName
The name of an existing network to modify
Properties:
Name The new name of the network
State Enables or disables the network. Valid values are "Enabled" and "Disabled"
SmartLink Enables or disables the SmartLink capability for a port
Examples:
->set network MyNetwork State=Disabled
Disables an existing network named "MyNetwork"
->set network Blue Name=Red
Changes the name of an existing network from "Blue" to "Red"
->set network GreenNetwork SmartLink=Enabled
Enables the SmartLink feature on a specific network
Item Description
show network Display all Ethernet networks in the domain
Syntax show network [<NetworkName> | *]
Examples:
->show network
Displays a summary listing of all networks
->show network *
Displays detailed information for all networks
->show network MyNetwork
Displays detailed information for a specific network
profile
Manage server profiles.
Supported actions:
add, assign, help, remove, set, show, unassign
Item Description
add profile Create a new server profile. After the profile has been created, the profile can
then be configured using the "set" subcommand and additional network and
fabric connections can also be added. The server profile can also be assigned to
a device bay using the "assign" subcommand.
Syntax add profile <ProfileName> [-NoDefaultEnetConn]
[-NoDefaultFcConn]
Parameters:
ProfileName The unique name of the new server profile to create
Options:
NoDefaultEnetConn Do not add default Ethernet Network connections when creating the server profile
NoDefaultFcConn Do not add default FC SAN connections when creating the server profile