HP EVA P6000 Storage - Manual (Page 156)

becomes an ordinary virtual disk, you may present that virtual disk as you would any other
ordinary virtual disk.
•
HBA must be properly configured to work in a single HBA server configuration. The user is
required to:
◦ Download and extract the contents of the TAR file.
HBA configuration
•
Host 1 is a single path HBA host.
•
Host 2 is a multiple HBA host with multipathing software.
See Figure 78 (page 156) .
Risks
•
Single path failure may result in loss of data accessibility and loss of host data that has not
been written to storage.
•
Controller shutdown results in loss of data accessibility and loss of host data that has not been
written to storage.
NOTE: For additional risks, see “Oracle Solaris” (page 165) .
Limitations
•
HP P6000 Continuous Access is not supported with single path configurations.
•
Single path HBA server is not part of a cluster.
•
Booting from the SAN is not supported.
Figure 78 Oracle Solaris configuration
5. SAN switch 1 1. Network interconnection
6. SAN switch 2 2. Single HBA server (Host 1)
7. Controller A 3. Dual HBA server (Host 2)
8. Controller B 4. Management server
156 Single path implementation