HP EVA P6000 Storage - Manual (Page 98)

c. c. To create iSCSI Initiator host, click Add host.
A dialog box opens.
•
Enter a name for the initiator host in the Name box.
•
Select iSCSI as the Type.
•
Select the initiator iSCSI qualified name (IQN) from the iSCSI node name list. Or,
you can enter a port WWN
•
Select an OS from the Operating System list.
d. Create a virtual disk and present it to the host you created in Step 2.c . Note the numbers
in the target IQN; these target WWNs will be referenced during Initiator login. See
Figure 34 (page 98) and Figure 35 (page 98) .
Figure 34 Virtual disk properties
Figure 35 Host details
98 iSCSI or iSCSI/FCoE configuration rules and guidelines