HP 3PAR Application Software Suite for Oracle - Manual (Page 117)

6.9 COMMAND
Recovery Manager for Oracle User’s Guide
■ PRIMARYHOST - The hostname of the primary (database) server where the Oracle database
instance is running. The value of the primary host name must match the output of the
hostname command.
■ TPDHOST - The backup hostname defined in the InServ Storage Server. The hostname can
be obtained from the output of the showhost InForm CLI command, and may not be the
UNIX hostname of the backup host.
■ REMOTE_SHELL - The remote shell (SSH or RSH) to be used by 3PAR Recovery Manager to
remotely execute commands on the primary host, backup host, or InServ Storage Server.
The remote shell must be configured on the primary host, backup host, and InServ Storage
Server prior to running the vcdba_config command.
■ TPDSYSNAME_PRIMARY - The 3PAR InServ Storage Server node name, which is connected
to the primary host
■ TPDSYSNAME_BACKUP - The 3PAR InServ Storage Server node name, which is connected to
the backup host.
■ TPDUSERNAME_PRIMARY - The 3PAR InServ Storage Server CLI user name to be used to
connect to the InServ Storage Server node from the primary host. This parameter is
required if SSH is specified as remote shell.
■ TPDUSERNAME_BACKUP - 3PAR InServ Storage Server CLI user name to be used to connect
to the InServ Storage Server node from the backup host. This parameter is required if SSH is
specified as remote shell.
■ TPDPWFILE_PRIMARY - 3PAR InServ Storage Server CLI user password file to be used to
connect to the InServ Storage Server node from the primary host. This parameter is
required if RSH is specified as remote shell.
■ TPDPWFILE_BACKUP - 3PAR InServ Storage Server CLI user password file to be used to
connect to the InServ Storage Server node from the backup host. This parameter is required
if RSH is specified as remote shell.
■ VCDBA_MAXVC - The maximum number (500) of the database virtual copies allowed at any
time.
■ VCDBA_RM_OLDVC - The flag indicates if an oldest virtual copy should be removed before
creating a new virtual copy when the number of virtual copies exceeds the maximum
allowed.
■ LDATAGROUP - The name of the Remote Copy group, which contains Oracle datafile
volumes, on the primary (local) InServ Storage Server.