HP 3PAR Application Software Suite for Oracle User Manual
Page 78
4.30
Recovery Manager Configuration Files
Recovery Manager for Oracle User’s Guide
Enter the system name of the InServ Storage Server that is connected to both the
primary and the backup hosts. The InServ Storage Server’s name can be retrieved from
the output of the
showsys
InForm CLI command.
◆
Enter InServ hostname (from showhost output) of the backup server
[h=help,q=quit]?
The hostname defined in the InServ Storage Server for the backup host can be retrieved
from the output of the 3PAR InForm CLI
showhost
command on the InServ Storage
Server.
The InServ Storage Server’s host name of the backup host may not be the same as the
DNS host name of the backup host.
◆
Enter InServ's user name for primary host [h=help,q=quit]?
You will only be prompted with this question if you previously selected SSH as the
remote shell.
Recovery Manager requires that a 3PAR InForm user must have been created on the
InServ Storage Server to allow access from the primary host to the InServ Storage Server.
◆
Enter 3PAR password file on primary host [h=help,q=quit]?
You will only be prompted with this question if you previously selected RSH as the
remote shell.
Recovery Manager requires that a 3PAR password file must have been created on the
primary host to allow access to the 3PAR InForm CLI from the primary host.
◆
Enter InServ's user name for the backup host [h=help,q=quit]?
You will only be prompted with this question if you previously selected SSH as the
remote shell.
Recovery Manager requires that a 3PAR InForm user must have been created on the
InServ Storage Server to allow access from the backup host to the InServ Storage Server.
◆
Enter 3PAR password file on backup host [h=help,q=quit]?
You will only be prompted with this question if you previously selected RSH as the
remote shell.
Recovery Manager requires that a 3PAR password file must have been created on the
backup host to allow access to the 3PAR InForm CLI from the backup host.