HP LaserJet 1100 All-in-One Printer series - Manual (Page 96)

86 Chapter 8 Troubleshooting the printer EN
Changing the pickup roller
If the printer regularly mispicks (no paper
is fed through or more than one sheet
feeds through), you may need to change
or clean the pickup roller. See
“Accessories and ordering information”
to order a new pickup roller.
1 Unplug the power cord from the
printer, and then allow the printer to
cool.
2 Open the door and remove the toner
cartridge.
3 Locate the pickup roller.
4 Rotate the bottom of the pickup roller
towards the front of the printer.
Continued on next page.
1
2
3
4