HP ProLiant ML350e Gen8 v2-Server - Manual (Page 28)

Operations 28
Remove the system air baffle
1. Power down the server (on page 23 ).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Unlock the front bezel (on page 24 ).
4. Place the server on its side.
5. Remove the access panel (on page 25 ).
6. If installed, remove the PCI air baffle (on page 27 ).
7. Remove the system air baffle.
Install the system air baffle
CAUTION: For proper cooling do not operate the server without the access panel, baffles,
expansion slot covers, or blanks installed.
1. Insert the system air baffle.
2. If removed, install the PCI air baffle (" PCI air baffle option " on page 38 ).