HP 14-in-1 USB2.3 3.5 Media Card Reader - Manual (Page 8)

Installing the Media Reader 13.3-cm (5.25-inch) Adapter
Kit
The Media Card Reader can be installed in a 8.9-cm (3.5-inch) or 13.3-cm (5.25-inch) computer drive
bay. If installing the 8.9-cm (3.5-inch) media card reader into a 13.3-cm (5.25-inch) drive bay, you
must first install the 13.3-cm (5.25-inch) accessory kit to the reader.
1. Remove the four screws (two on each side) from the media card reader.
Figure 1-1 Removing screws from Media Card Reader
2. Assemble the rails and bezel and attach to the media card reader with the four screws removed
in step 1.
Figure 1-2 Attaching Rails and Bezel
2 Chapter 1 Product Features