HP 14-in-1 USB2.3 3.5 Media Card Reader - Manual (Page 9)

2 Installing the Media Card Reader
Accessing the Internal Components of the Computer
CAUTION: Static electricity can damage the electronic components of the computer or optional
equipment. Before beginning these procedures, ensure that you are discharged of static electricity by
briefly touching a grounded metal object. Refer to the documentation included with your computer for
additional information on preventing electrostatic discharge.
CAUTION: When the computer is plugged into an AC power source, voltage is always applied to
the system board. You must disconnect the power cord from the power source before opening the
computer to prevent system board damage.
WARNING! To reduce the risk of personal injury from electrical shock and/or hot surfaces, be sure
to disconnect the power cord on the computer from the wall outlet and allow the internal system
components to cool before touching.
To prepare the computer for installation of the HP 14-in-1 Media Card Reader, refer to the
documentation included with your computer for detailed instructions to:
1. Power off and unplug the computer from the power source.
2. Remove the computer cover or access panel.
3. Remove the front bezel.
Figure 2-1 Accessing the Internal Components
Accessing the Internal Components of the Computer 3