HP LaserJet Pro CP1525nw Color Printer - Manual (Page 26)

System Setup menu
In the following table, items that have asterisks (*) indicate the factory default setting.
Menu item Sub-menu item Sub-menu item Description
Language Select the language for the control panel
display messages and the product
reports.
Paper Setup Def. paper size Letter
A4
Legal
Select the size for printing internal
reports or any print job that does not
specify a size.
Def. paper type A list of available paper
types appears. Select the paper type for printing internal
reports or any print job that does not
specify a type.
Tray 2 Paper type
Paper size
Select the default size and type for Tray 2
from the list of available sizes and types.
Paper out action Wait forever*
Cancel
Override
Select how the product should react
when a print job requires a size or type
that is not available or when a specified
tray is empty.
Select the Wait forever option to make
the product wait until you load the correct
paper and press the
OK button. This is
the default setting.
Select the Override option to print on a
different size or type after a specified
delay.
Select the Cancel option to automatically
cancel the print job after a specified
delay.
If you select either the Override or
Cancel options, the control panel
prompts you to specify the number of
seconds to delay. Press the
Right arrow
button to increase the time, up to
3600 seconds. Press the Left arrow
button to decrease the time.
Print quality Calibrate color After power on
Calibrate now
After power on: Select how soon the
product should calibrate after you turn it
on. The default setting is 15 minutes.
Calibrate now: Makes the product
perform a calibration immediately. If a job
is processing, the product calibrates after
the job is complete. If an error message
displays, you must clear the error first.
12 Chapter 2 Control panel menus ENWW