HP XP Performance Advisor Software - Manual (Page 48)

–ms <management
station>
The URL of the management station.
–auth <user:passwd> The username and password.
–pf <password file>
Can be used in place of -auth.
NOTE:
The password file must be created using only the encrypt command.
–th1 <threshold> The first threshold of these alarms.
–th2 <threshold> The second threshold of these alarms.
–th3 <threshold> The third threshold of these alarms.
–email <Email List> A csv list of email destinations.
–snmp <SNMP List> A csv list of SNMP destinations.
–e
Indicates if the alarm is enabled.
–d<delim> The delimiter for delimited display. Used with -list and -details.
–hr Displays human-readable output. Used with -list and -details.
–? Prints the usage statement.
The following metrics are applicable to mainframe volumes only:
CFW_TOTAL LDEV IO type
CFW_READ LDEV IO type
CFW_READ_CACHE LDEV IO type
CFW_WRITE LDEV IO type
CFW_WRITE_CACHE LDEV IO type
DFW_COUNT LDEV IO type
DFW_NRML_COUNT LDEV IO type
DFW_SEQ_ACCESS LDEV IO type
DFW_WRITE_HITS LDEV IO type
DFW_SA_WRITE_HITS LDEV IO type
The XP Thin Provisioning (THP) Pool Occupancy, Snapshot Pool Occupancy, and Continuous Access
Journal metric category for an XP24000 array can be determined using the following commands:
configalarm -dkc <array sn no> -mval <THP poolid> -metric THP_POOL_OC-
CUPANCY
configalarm -dkc <array sn no> -mval <Snapshot poolid> -metric SNAPSHOT_
POOL_OCCUPANCY
configalarm -dkc <array sn no> -mval <Snapshot poolid> -metric
JOURNAL_FILE_USAGE_UTIL
CONFIGALARM sample output
The following are output data samples for the CLUI shell script described in the previous section:
48 Reporting and configuring CLUI shell scripts