HP XP P9500 Storage - Manual (Page 19)

4 Using Compatible XRC
This topic provides instructions for using the features of Compatible XRC.
Launching Compatible XRC
Procedure 1 To open the Compatible XRC window:
1. Log on to the P9500
2. Log into Remote Web Console.
The Remote Web Console main window appears.
3. On the Remote Web Console menu bar, click Action > Mainframe Connection > XRC.
The Compatible XRC window appears.
4. Change to Modify mode.
For the information about changing to modify mode, see the HP XP P9000 Remote Web
Console User Guide.
For instructions on using Remote Web Console, see the HP XP P9000 Remote Web Console User
Guide.
To complete the Compatible XRC operations, click Close ( ).
Setting the Compatible XRC options
Use Compatible XRC to set the Compatible XRC options.
1.
In the XRC options table, right-click the CLPRs for which you want to make option settings.
2. On the pop-up menu, select Change Option.
3. In the Change Option dialog box, set the desired Compatible XRC options.
To apply the same Compatible XRC options to all CLPRs, select The same setting is applied
check box, and click OK on the confirmation message.
4. When you have finished changing Compatible XRC options, click OK to save your changes
and close the Change Option dialog box.
The requested Compatible XRC option settings are displayed in the Preview list, and the
requested changes are displayed in blue, bold, italics in the XRC option list.
5. Click Apply.
Depending on your settings, a confirmation dialog box may appear and inform you that one
or more pairs may be suspended.
6. When you have finished confirming the dialog box, click OK.
A confirmation dialog box appears and asks whether you apply the settings to the storage
system.
7. When you have finished confirming the dialog box, click OK.
A confirmation dialog box appears and informs you that the operation is finished.
8. Click OK.
The settings are reflected in the XRC option list in the Compatible XRC window. This completes
the setting of the Compatible XRC options.
Changing the settings in the preview list
Use the XRC Option window to change the settings of the Preview list.
Launching Compatible XRC 19