HP Officejet Pro 276dw Multifunction Printer series - Manual (Page 24)

Tips for selecting and using paper
For the best results, observe the following guidelines.
•
Always use media that conforms to the printer specifications. For more
information, see Paper specifications.
• Load only one type of media at a time into a tray or automatic document feeder
(ADF).
• When loading the trays and ADF, make sure the media is loaded correctly. For
more information, see Load paper or Load an original in the automatic document
feeder (ADF).
• Do not overload the tray or ADF. For more information, see Load paper or Load
an original in the automatic document feeder (ADF).
• To prevent jams, poor print quality, and other printing problems, avoid loading the
following media in the trays or ADF:
◦
Multipart forms
◦ Media that is damaged, curled, or wrinkled
◦ Media with cutouts or perforations
◦ Media that is heavily textured, embossed, or does not accept ink well
◦ Media that is too lightweight or stretches easily
◦ Media that contains staples or clips
Load an original on the scanner glass
You can copy, scan, or fax up to legal-size originals by loading them on the scanner
glass.
NOTE: Many of the special features do not work correctly if the scanner glass and
lid backing are not clean. For more information, see Maintain the printer.
To load an original on the scanner glass
Use these steps to load an original on the scanner glass.
1.
Lift the scanner lid.
2. Load your original print-side down.
TIP: For more help on loading an original, refer to the engraved guides along
the edge of the scanner glass.
Chapter 1
20 Get started