HP Officejet Pro 276dw Multifunction Printer series - Manual (Page 27)

Load standard-size paper
Use these instructions to load standard paper.
1.
Pull out Tray 1.
2. Insert the media print-side down in the center of the tray. Make sure the stack of
media aligns with the line on the width guide, and is not higher than the paper
stack line on the guide.
NOTE: Do not load paper while the printer is printing.
3. Slide the paper guides in the tray to adjust them for the media size that you have
loaded, and then reinsert the tray.
NOTE: To load legal-size paper, press the blue latch at the bottom left of the
input tray and fully extend the tray.
4. Pull out the extension on the output tray.
Load paper 23