HP MPX200 Multifunction Router - Manual (Page 70)

------------------
program vers proto port service
100000 4 tcp 111 portmapper
100000 3 tcp 111 portmapper
100000 2 tcp 111 portmapper
100000 4 udp 111 portmapper
100000 3 udp 111 portmapper
100000 2 udp 111 portmapper
100000 4 0 111 portmapper
100000 3 0 111 portmapper
100000 2 0 111 portmapper
351517 1 udp 718
351517 1 tcp 718
351516 1 udp 718
351516 1 tcp 718
351522 1 udp 720
351522 1 tcp 720
351521 1 udp 893
351521 1 tcp 893
351515 1 udp 944
351515 1 tcp 944
show SmartWrite devices
Displays the port names of FC devices (initiators and targets) that can be remotely mapped using
SmartWrite.
SmartWrite is a solution to optimize data transfer by linking SANs over WANs. SmartWrite
improves performance, lowers management overhead, consolidates islands of multi-vendor SANs,
and improves utilization of WAN and SAN resources.
NOTE: The SmartWrite feature is not currently supported.
Authority
None
Syntax
show swdevices
Example
The following example shows the show swdevices command:
MPX200 <1> (admin) #> show swdevices
Smart Write Discovered Device Information
-----------------------------------------
WWNN 20:00:00:18:62:6f:d7:7c
WWPN 21:00:00:18:62:6f:d7:7c
Port ID 01-02-cc
State Online
WWNN 20:00:00:18:62:6f:d7:5e
WWPN 21:00:00:18:62:6f:d7:5e
Port ID 01-02-d3
State Online
WWNN 20:00:00:18:62:6f:d7:6f
WWPN 21:00:00:18:62:6f:d7:6f
Port ID 01-02-d5
State Online
WWNN 20:00:00:18:62:6f:d7:79
70 Command reference