HP MPX200 Multifunction Router - Manual (Page 96)

d. Add this discovery domain to a set, and then enable this discovery domain set.
Figure 2 (page 96) shows an example on Windows.
Figure 2 Enabling a discovery domain set
6. List the discovered targets by issuing the show targets command.
Logging in to the iSCSI targets
1. Issue the iscsi login command, and then follow the prompts.
A list of attributes appears with the current value in brackets.
2. At the prompts, select the target and IP address, and then specify additional target attributes
as needed. For example:
MPX200 <1> (admin) #> iscsi login
Index (WWNN,WWPN/iSCSI Name)
----- ----------------------
0
iqn.2001-05.com.equallogic:0-8a0906-7e33e0d06-83c835550264bede-demo1
Please select a Target from the list above ('q' to quit): 0
Index IP Address
----- ----------
0 192.168.95.48
Please select an IP Address from the list above ('q' to quit):
TCP Port No. [3260 ]
96 Configuring Fibre Channel initiators to iSCSI storage