HP Color LaserJet Enterprise flow M880 Multifunction Printer series - Manual (Page 108)

Menu Item Description
Update Firmware Transfers a firmware update file to the product.
NOTE: This option is available only after you open the View menu and
select the Show Advanced Options item.
Commands Sends special characters or print commands to the product after the print
job.
NOTE: This option is available only after you open the View menu and
select the Show Advanced Options item.
Printer Settings Supplies Management Configures how the product should behave when supplies are nearing the
end of their estimated life.
Trays Configuration Changes the default tray settings.
Output Devices Manages settings for optional output accessories.
Duplex Mode Turns on the automatic two-sided printing mode.
Protect Direct Ports Disables printing over USB or parallel ports.
Stored Jobs Manages print jobs that are stored on the product hard disk.
Network Settings Configures the network settings, such as the IPv4 and IPv6 settings.
Additional Settings Provides access to the HP Embedded Web Server.
Scan Settings Scan to E-mail Opens the HP Embedded Web Server page for configuring settings for
scanning to email.
NOTE: USB connections are not supported.
Scan to Network Folder Opens the HP Embedded Web Server page for configuring settings for
scanning to a network folder.
NOTE: USB connections are not supported.
98 Chapter 8 Manage the product ENWW