HP Color LaserJet Enterprise flow M880 Multifunction Printer series - Manual (Page 36)

4. Load paper into the tray. Check the paper to
verify the guides lightly touch the stack, but do
not bend it.
NOTE: To prevent jams, do not overfill the tray.
Be sure that the top of the stack is below the tray
full indicator.
NOTE: If the tray is not adjusted correctly, an
error message might appear during printing or
the paper might jam.
5. Close the tray.
6. The control panel shows the tray’s paper type
and size. If the configuration is not correct, follow
the instructions on the control panel to change
the type or size.
7. For custom-size paper, you need to specify the X
and Y dimensions for the paper when the prompt
displays on the product control panel.
Y
X
26 Chapter 2 Paper trays ENWW