Creating an md device, Creating an md device -155 – HP XP P9500 Storage User Manual

Page 223

Advertising
background image

In mdadm package versions 1.6.0-2 or earlier, you cannot manage

devices whose major or minor number is 256 or greater. Use mdadm

package versions 1.6.0-3 or later.

You cannot simultaneously specify SCSI devices and HDLM devices to

configure an md device.

Figure 3-23 Example of Incorrectly Configured

md Devices on page 3-155

shows an example when SCSI devices and

HDLM devices are simultaneously specified by mistake.

Figure 3-23 Example of Incorrectly Configured md Devices

If you want to manage md devices by using HDLM, migrate the md

devices that are made up of SCSI devices to the md devices that are

made up of HDLM devices.

Figure 3-24 Example of Correctly Configured

md Devices on page 3-155

shows an example when this migration is

performed.

Figure 3-24 Example of Correctly Configured md Devices

Creating an md Device

This subsection explains the procedure for creating a new md device in a

multi-path environment in which HDLM has been installed.

Creating an HDLM Environment

3-155

Hitachi Dynamic Link Manager User Guide (for Linux(R))

Advertising
This manual is related to the following products: